5/22/2020

5/22/2020

Today I will finish the lesson design intent: part orientation and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson Fillets and ,and went through the lesson and tried it on my own.

Next time, I will finish the lesson design intent: end conditions, and then try it on my own and continue to go along with the videos and try it on my with the just the website.

5/15/2020

5/15/2020

Today I will finish the lesson Fillets and Chamfers and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson Revolves,and went through the lesson and tried it on my own.

Next time, I will finish the lesson design intent:part orientation and then try it on my own and continue to go along with the videos and try it on my with the just the website.

5/8/2020

5/8/2020

Today I will finish the lesson Revolves and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson Extruded Boss and Extruded Cut ,and went through the lesson and tried it on my own.

Next time, I will finish the lesson Fillets and Chamfers and then try it on my own and continue to go along with the videos and try it on my with the just the website.

05/01/2020

05/01/2020

Today I will finish the lesson Extruded Boss and Extruded Cut and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson Contours ,and went through the lesson and tried it on my own.

Next time, I will finish the lesson Revolves, and then try it on my own and continue to go along with the videos and try it on my with the just the website.

4/24/2020

4/24/2020

Today I will finish the lesson Contours and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson Convert and Offset Entities ,and went through the lesson and tried it on my own.

Next time, I will finish the lesson Extruded Boss and Extruded Cut, and then try it on my own and continue to go along with the videos and try it on my with the just the website.

4/17/2020

4/17/2020

Today I will finish the lesson Convert and Offset Entities and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson Mirror ,and went through the lesson and tried it on my own.

Next time, I will finish the lesson Contours, and then try it on my own and continue to go along with the videos and try it on my own with the website.

03/10/2020

03/10/2020

Today I will finish the lesson Mirror and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson Fully defining a sketch,and went through the lesson and tried it on my own.

Next time, I will finish the lesson sketch: Convert and Offset Entities, and then try it on my own and continue to go along with the videos and try it on my own.

03/06/2020

03/06/2020

Today I will finish the lesson Fully Defining a Sketch and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson Automatic relations,and went through the lesson and tried it on my own.

Next time, I will finish the lesson Sketch Mirror, and then try it on my own and continue to go along with the videos and try it on my own.

03/02/2020

03/02/2020

Today I will finish the lesson automatic relations,and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson Relations,and went through the lesson and tried it on my own.

Next time, I will finish the lesson Fully Defining a Sketch, and then try it on my own and continue to go along with the videos and try it

on my own.

02/27/2020

02/27/2020

Today I will finish the lesson Relations and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson ellipses and slots,and went through the lesson and tried it on my own.

Next time, I will finish the lesson Automatic Relations,and then try it on my own and continue to go along with the videos and try it on my own.

02/25/2020

02/25/2020

Today I will finish the lesson ellipses and slots, and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson trimming and went through the lesson and tried it on my own.

Next time, I will finish the lesson Relations and then try it on my own and continue to go along with the videos and try it on my own.

02/21/2020

02/21/2020

Today I will finish the lesson trimming and after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson fillets and chamfer and went through the lesson and tried it on my own.

Next time, I will finish the lesson ellipses and slots and then try it on my own and continue to go along with the videos and try it on my own.

02/19/2020

02/19/2020


Today I will finish the lesson Fillets and Chamfers, after will continue to practice on pictures to try it on my own, and try to learn from it.

Since the last blog I've accomplished to finish the lesson cirlce and arc, and went through the lesson and tried it on my own.

Next time, I will finish the lesson trimming and then try it on my own and continue to go along with the videos and try it on my own.

02/12/2020

02/12/2020

Today I will finish the lesson circles and arcs, after will continue to practice on pictures to try it on my own.

Since the last blog I've accomplished to finish the lessons called Rectangle and went through the lesson and tried it on my own.

Next time, I will start on the next lesson called Sketch Fillets and Chamfers and go with the lesson and continue to go along with the videos and try it on my own.

02/10/2020

01/10/2020

Today I will finish the lesson Rectangles and will go on solidworks and work on it and try it on my own.

 I accomplished finishing another important lesson in my training since the last blog.

Next time I will do the next lesson which is sketch entities: Circles and Arcs.

1/29/2020

1/29/2020

Today I will finish lines and centerlines and practice and try it on my own.


Next time I will finish the next lesson which is called rectangles.

01/27/2020

01/27/2020


Will start the smart dimension lesson and finish it and learn and try it on my own.


Next time will start the next lesson which is lines and entities.

1/23/2003

01/21/2003

I've been on my solidworks and getting done with the sketch exercise and continuing and trying it on my own.

Next time I'm going to start the next subject which is smart dimension.

01/21/2020

01/21/2020

This is my first blog so far and my object is to start the new certification. I was starting to get started on solidworks and signing up for the program on mysolidworks.com.

My next plan I'm going through the lessons.